21 Sep 2023

Field Demonstration of a Peroxide-Based Algaecide for Harmful Algal Bloom Control in Lake Okeechobee

Abstract: Large-scale cyanobacterial harmful algal blooms (cHABs) in Lake Okeechobee, Florida, and connected waterways routinely impair water resources. This study conducted a field demonstration of a peroxide-based algaecide in 2020 in the Pahokee Marina on Lake Okeechobee to evaluate the algaecide’s suitability for near-future operational implementation. Within minutes of treatment, rapid oxidation of cHAB cells occurred in the form of bleaching and cell lysis. On average, levels in the treatment area decreased by 4 hours after treatment (HAT) and remained low out to 24 HAT: chlorophyll decreased 87%, phycocyanin decreased 85%, total microcystin levels decreased from 50 μg L⁻¹ to 4 μg L⁻¹ at 4 HAT and then increased to 11 μg L⁻¹ by 24 HAT, hydrogen peroxide concentrations averaged 6.1 mg L⁻¹ 0.5 HAT and then dropped below detection limits by 24 HAT, and Microcystis spp. cell densities decreased at 4 HAT in all but four sampling sites. However, inflows of cHAB-infested lake water in some portions of the treatment area resulted in lack of control at these sites. Because of their vulnerability to influxes of cHABs from surrounding nontreated waters via water-exchange processes driven by wind-induced surface currents, future applications must therefore consider treatment area size.

20 Sep 2023

Mapping and Localization Within a Mock Sewer System

Abstract: Herein, we explored a robot’s ability to localize and map, both in simulation and on a physical robot, within a mock sewer system. Mapping and localization techniques were first developed and tested in simulation and were then transitioned to the actual robot for additional physical testing. Several odometry and simultaneous localization and mapping (SLAM) techniques, including gmapping, SLAM toolbox, elevation mapping, and RTABMap, were evaluated for this particular environment. The results of the odometry and the various SLAM approaches are discussed in detail.

18 Sep 2023

A Resilient Path Forward for the Marine Transportation System: Recommendations for Response and Recovery Operations from the 2017-2019 Hurricane Seasons

Abstract: The Marine Transportation System (MTS), Resilience Integrated Action Team (RIAT), is tasked by the coordinating board of the US Committee on the MTS to serve as a coordinating body to identify the impacts, best practices, and lessons learned by federal agencies involved in the response and recovery of the MTS after hurricane seasons. In response to this request, the RIAT has focused its analysis on the ability of MTS federal agencies to prepare, respond, recover, and adapt to as well as from disruptions. This was accomplished through workshops focused on gathering the collective experiences of emergency response professionals. In 2017, recommendations were gathered based on experiences responding to Hurricanes Harvey, Irma, and Maria. In this report, a similar approach was adopted to gather findings from Hurricanes Florence and Michael in 2018 and Hurricane Dorian in 2019. Utilizing the successes, challenges, and best practices from all six of these storms, the RIAT identified key coordinating bodies and the participants for each and key takeaways relative to the coordination of agencies with respect to the four steps of resilience: prepare, absorb, recover, and adapt.

18 Sep 2023

Accelerated Corrosion of Infrastructural Seven-Strand Cables via Additively Manufactured Corrosion Flow Cells

Purpose: The purpose of this project was to generate an accelerated corrosion methodology capable of producing seven-strand cables with simulated corrosive defects for calibration of nondestructive analysis (NDA) techniques. An additively manufactured accelerated corrosion cell was motivated and designed. Previous attempts at accelerated electrochemical corrosion used a large cable area with a current density that was too low (i.e., 1 A/m²)* to effectuate efficient corrosion. The accelerated corrosion cell presented here takes advantage of the restricted area within the corrosion flow cell to maximize the corrosion rate in a consistent and calibrated manner (i.e., 2,000 A/m²).

15 Sep 2023

ERDC: A Tradition of Innovation

Abstract: As the U.S. Army Engineer Research and Development Center (ERDC) celebrates its 25th anniversary, “A Tradition of Innovation” traces the organization’s history from its precarious roots through its evolution into a world-class organization solving the toughest problems facing the nation and the Warfighter. This book highlights the key inflection points that shaped ERDC–from responding to national crises like 9/11 and Hurricane Katrina to changing climates, evolving military strategies and demands for greater computational power. As ERDC prepares to solve a myriad of new and escalating challenges, its engineers and scientists will build upon its tradition of innovation and lean into the cross-disciplinary culture forged during the organizations’ first quarter century.

15 Sep 2023

Real-Time Forecasting Model Development Work Plan

Abstract: The objective of the Lowermost Mississippi River Management Program is to move the nation toward more holistic management of the lower reaches of the Mississippi River through the development and use of a science-based decision-making framework. There has been substantial investment in the last decade to develop multidimensional numerical models to evaluate the Lowermost Mississippi River (LMMR) hydrodynamics, sediment transport, and salinity dynamics. The focus of this work plan is to leverage the existing scientific knowledge and models to improve holistic management of the LMMR. Specifically, this work plan proposes the development of a real-time forecasting (RTF) system for water, sediment, and selected nutrients in the LMMR. The RTF system will help inform and guide the decision-making process for operating flood-control and sediment-diversion structures. This work plan describes the primary components of the RTF system and their interactions. The work plan includes descriptions of the existing tools and numerical models that could be leveraged to develop this system together with a brief inventory of existing real-time data that could be used to validate the RTF system. A description of the tasks that would be required to develop and set up the RTF system is included together with an associated timeline.

14 Sep 2023

Surge Analysis in Mobile Harbor, Alabama: Ship-Simulation Report

Abstract: A navigation channel improvement study for Mobile Harbor was conducted by the US Army Corps of Engineers, Mobile District (CESAM), and the Alabama State Port Authority. The US Army Engineer Research and Development Center (ERDC) assisted CESAM in assessing channel modifications using ERDC’s Ship/Tow Simulator through a Feasibility Level Screening Simulation study in 2017 and through a more comprehensive ship-simulation study in 2020. During the 2020 study, a safety concern was identified related to vessel interactions between a transiting vessel passing docked vessels at the McDuffie Coal Terminal located along the main federal channel. In the previous ship-simulation studies, the docked vessels were represented as targets, which means the ships are visually represented but no hydrodynamic interaction is captured. To fully assess this interaction, a surge-analysis study was completed in 2022 that used hydrodynamic models to represent docked vessels with representative mooring conditions. This study assessed several proposed navigation channel expansions across from the McDuffie Coal Terminal over the course of six testing days with four pilots. Assessment of the proposed modifications was accomplished through analysis of ship simulations completed by experienced local pilots, track plots, run sheets, and final pilot questionnaires.

13 Sep 2023

Sensitivity of Sediment Transport Analyses in Dam Removal Applications

Abstract: Dam removal has become a widespread river management practice in the US for a variety of goals including ecosystem restoration, removing aging infrastructure, flood risk management, and recreation. The ability to forecast the sediment impacts of dam removal is critical to evaluating different management alternatives that can minimize adverse consequences for ecosystems and human communities. Tullos et al. (2016) identified seven Common Management Concerns (CMCs) associated with dam removal. Four of these CMCs; degree and rate of reservoir sediment erosion, excessive channel incision upstream of reservoirs, downstream sediment aggradation, and elevated downstream turbidity are associated with stored sediment release and changing fluvial hydraulics. There are a range of existing qualitative and quantitative tools developed to infer or quantify geomorphic implications of disturbances like these in river environments (McKay et al. 2019). This study investigated how a one-dimensional (1D) sediment transport model can inform these four CMCs, develop an approach for assessing sediment transport model sensitivity in the context of the Simkins Dam removal, and use sensitivity analyses to identify key uncertainties, which can inform data collection and model building for other dam removal projects. For the selected case study, model outputs including the mean effective invert change (MEIC) and eroded sediment volume from reservoir were highly sensitive to the variation of the reservoir sediment gradation and sorting method selection. These model outputs also showed some sensitivity to the selected transport functions. Erosion method sensitivity using the channel evolution method will vary depending on side slope and channel parameter selection.

13 Sep 2023

Cold Impacts on Vehicle Electrical Systems: Developing a Baseline for Cold Testing Military Vehicles

Abstract: Low temperatures can significantly affect vehicle operation. While many of the effects, like increased fluid viscosity and decreased battery capacity, are well documented, the impacts on the electrical system as a whole are not. The objective of this study was to investigate the impacts of temperature on the electrical systems of select military vehicles and to develop a baseline for future testing. A High Mobility Multipurpose Wheeled Vehicle (HMMWV), a Heavy Expanded Mobility Tactical Truck (HEMTT), and a four-person diesel Polaris MRZR D4 were subjected to 15°C, 0°C, and −15°C temperatures while the loads on the battery and alternator were monitored. The HMMWV and MRZR were able to start on the first try for all tests. They both showed a slight increase in vehicle load current draw from the alternator as temperatures decreased. Future testing with more iterations and at lower temperatures will help identify clearer trends and improve testing procedures. As the Army becomes more reliant on electronic systems, it is becoming increasingly important that we understand how various climates will impact them.

12 Sep 2023

UGV SLAM Payload for Low-Visibility Environments

Abstract: Herein, we explore using a low size, weight, power, and cost unmanned ground vehicle payload designed specifically for low-visibility environments. The proposed payload simultaneously localizes and maps in GPS-denied environments via waypoint navigation. This solution utilizes a diverse sensor payload that includes wheel encoders, inertial measurement unit, 3D lidar, 3D ultrasonic sensors, and thermal cameras. Furthermore, the resulting 3D point cloud was compared against a survey-grade lidar.