Publication Notices

Notifications of New Publications Released by ERDC

Contact Us

      

  

    866.362.3732

   601.634.2355

 

ERDC Library Catalog

Not finding what you are looking for? Search the ERDC Library Catalog

Results:
Category: Publications: Coastal and Hydraulics Laboratory (CHL)
Clear
  • The Old River, Mississippi River, Atchafalaya River, and Red River (OMAR) Technical Assessment

    NOTE: The Old River, Mississippi River, Atchafalaya River, and Red River (OMAR) Technical Assessment is a 9-volume series of reports that was produced under the direction of the Mississippi River Geomorphology & Potamology Program. An abstract from the main report, Volume 1, is listed below, along with the individual volume titles and links to the relevant reports. ABSTRACT: This is the main report of Old River, Mississippi River, Atchafalaya River, and Red River (OMAR) Technical Assessment. The primary objective of the OMAR Technical Assessment was to conduct a comprehensive evaluation that aimed to understand the impacts of former and potential changes to the system in the vicinity of the Old River Control Complex (ORCC) over time, the water and sediment delivery regime at the ORCC, and the effects to the river system surrounding the ORCC. Scenarios evaluated in this technical assessment were designed to investigate potential system responses to a wide range of possible operational alternatives and identify knowledge gaps in current understanding of system behavior. This report summarizes and synthesizes the individual reports detailing the investigations into specific aspects of the ORCC and the surrounding region.
  • Swan Island: Monitoring and Adaptive Management Plan

    Abstract: Swan Island is a 10.12 ha island located in the Maryland waters of the Chesapeake Bay. Because of its value as a natural wave break for the town of Ewell on nearby Smith Island, as well as the ongoing erosion and subsidence of the island, in 2019 US Army Corps of Engineers (USACE)–Baltimore District placed 45,873 m³ of dredged sediment and planted 200,000 marsh plants. This restoration provided an opportunity to quantify the engineering (that is, resilience) and ecological performance of the island, postplacement. The lack of quantitative data on the performance of natural features such as islands has led to perceived uncertainties that are often cited as barriers to implementation. To address these data gaps, a multidisciplinary collaboration of five government entities identified project objectives and monitoring parameters through a series of mediated workshops and then developed a conceptual model to articulate those parameters and the linkages between them. This monitoring and adaptive management plan (MAMP) documents those monitoring parameters and procedures and can serve as an example for other scales, regions, and research questions. Documenting research and monitoring efforts may help to foster widespread acceptance of nature-based solutions such as islands.
  • Evaluation of Unmanned Aircraft Systems for Flood Risk Management: Results of Terrain and Structure Assessments

    Abstract: The 2017 Duck Unmanned Aircraft Systems (UAS) Pilot Experiment was conducted by the US Army Engineer Research and Development Center (ERDC), Coastal and Hydraulics Laboratory, Field Research Facility (FRF), to assess the potential for different UAS to support US Army Corps of Engineers coastal and flood risk management. By involving participants from multiple ERDC laboratories, federal agencies, academia, and private industry, the work unit leads were able to leverage assets, resources, and expertise to assess data from multiple UAS. This report compares datasets from several UAS to assess their potential to survey and observe coastal terrain and structures. In this report, UAS data product accuracy was analyzed within the context of three potential applications: (1) general coastal terrain survey accuracy across the FRF property; (2) small-scale feature detection and observation within the experiment infrastructure area; and (3) accuracy for surveying coastal foredunes. The report concludes by presenting tradeoffs between UAS accuracy and the cost to operate to aid in selection of the best UAS for a particular task. While the technology and exact UAS models vary through time, the lessons learned from this study illustrate that UAS are available at a variety of costs to satisfy varying coastal management data needs.
  • A Community Engagement Framework Using Mental Modeling: The Seven Mile Island Innovation Lab Community Engagement Pilot—Phase I

    Abstract: The US Army Corps of Engineers (USACE) engages and collaborates with multiple stakeholders—from agency partners, to public, private, and not-for-profit organizations, to community residents—to develop its dredged-sediment long-term management strategy (LTMS) that expands beneficial-use (BU) practices. In spring 2019, USACE collaborated with Decision Partners, the USACE–Philadelphia District Operations Division, The Wetlands Institute, and the Engineering With Nature program leadership to adapt, test, and refine the proven behavioral-science-based processes, methods, and tools based on Decision Partners’ Mental Modeling Insight, or MMI, approach for engaging stakeholders, including community members, as part of the Seven Mile Island Innovation Laboratory (SMIIL) initiative in coastal New Jersey. The team identified key community stakeholders and conducted research to better understand their values, interests, priorities, and preferences regarding wetlands and USACE activities in the Seven Mile Island area and those activities’ effects on wetlands, including protecting the environment, wildlife habitat, aesthetic beauty, maintaining navigability, and supporting coastal resilience. Understanding stakeholder needs, values, interests, priorities, and preferences is key to designing effective engagement strategies for diverse communities for SMIIL and provides a foundation for the community engagement framework currently being developed for application across USACE.
  • Supporting Bank and Near-bank Stabilization and Habitat Using Dredged Sediment: Documenting Best Practices

    Abstract: In-water beneficial use of dredged sediment provides the US Army Corps of Engineers (USACE) the opportunity to increase beneficial use while controlling costs. Beneficial use projects in riverine environments include bank and near-bank placement, where sediments can protect against bank erosion and support habitat diversity. While bank and near-bank placement of navigation dredged sediment to support river-bank stabilization and habitat is currently practiced, documented examples are sparse. Documenting successful projects can support advancing the practice across USACE. In addition, documentation identifies data gaps required to develop engineering and ecosystem restoration guidance using navigation-dredged sediment. This report documents five USACE and international case studies that successfully applied these practices: Ephemeral Island Creation on the Upper Mississippi River; Gravel Island Creation on the Danube River; Gravel Bar Creation on the Tombigbee River; Wetland Habitat Restoration on the Sacramento-San Joaquin River Delta; and Island and Wetland Creation on the Lower Columbia River Estuary. Increased bank and near-bank placement can have multiple benefits, including reduced dredge volumes that would otherwise increase as banks erode, improved sustainable dredged sediment management strategies, expanded ecosystem restoration opportunities, and improved flood risk management. Data collected from site monitoring can be applied to support development of USACE engineering and ecosystem restoration guidance.
  • Investigation of Sources of Sediment Associated with Deposition in the Calcasieu Ship Channel

    Abstract: The Calcasieu Ship Channel (CSC) is a deep-draft federal channel located in southwest Louisiana. It is the channelized lowermost segment of the Calcasieu River, connecting Lake Charles to the Gulf of Mexico. With support from the Regional Sediment Management Program, the US Army Corps of Engineers, New Orleans District, requested that the US Army Engineer Research and Development Center, Coastal and Hydraulics Laboratory, perform an investigation of the potential sources of sediment associated with dredging in the CSC. A previous study had quantified sediment from known sources, indicating that the known sediment sources contribute approximately only 21% of the volume that is regularly dredged from the channel. This technical report details the results of the current study, which employed multiple methods, including numerical analysis, to identify potential additional sources of sediment by first examining the available literature and the modeled energetics and flow pathways, and then estimating the quantities of sediment associated with these identified sources that may be contributing to the shoaling of the CSC. The results of these efforts were used to update the original sediment budget with estimates of the contributions from two additional sources: the erosion of interior wetlands and coastally derived sediments.
  • Using Geophysical and Erosion Properties to Identify Potential Beneficial Use Applications for Atlantic Intracoastal Waterway Sediments

    Abstract: In an effort to identify alternative and beneficial use placement strategies for dredged sediments from the Atlantic Intracoastal Waterway (AIWW), the US Army Corps of Engineers, Savannah District (SAS), and the US Army Engineer Research and Development Center (ERDC) performed a series of physical property tests of 34 core borings from the SAS AIWW. Physical property testing found that 14 of the borings were non-cohesive sandy materials that may be suitable for potential beach renourishment or berm construction. The remaining 20 borings had mud contents sufficient enough to result in cohesive behavior. A subset of six of these materials from across the geographic region were further evaluated to characterize their erosion behavior. Following a self-weight consolidation period of 30 days, erosion testing showed that the tested cohesive sediments had critical shear stress values that ranged from 1.7 Pa to 2.9 Pa, suggesting that these sediments would likely be resistant to erosion in most wetland environments after placement. Additionally, the cohesive sediments were found to produce gravel-sized mud clasts. These clasts could account for 20% or more of the eroded mass and significantly reduce the amount of silts and clays incorporated in suspended plumes during and immediately following placement.
  • Sediment Provenance Studies of the Calcasieu Ship Channel, Louisiana

    Abstract: To maintain the navigability of the Calcasieu Ship Channel (CSC), the US Army Corps of Engineers annually dredges millions of cubic yards of sediment from the inland channel. To assess sources of channel shoaling, a previous study examined river and bankline erosion as inputs. Results from that study accounted for approximately 20% of dredged volumes. Through the support of the Regional Sediment Management Program, a follow-up investigation reviewed prior sediment budgets, identified potential missing sediment sources, modeled potential sediment pathways, and utilized geochemical fingerprinting to discern primary shoaling sources to the channel. The missing sediment sources from the original budget include coastally derived sediment from the Gulf of Mexico and terrestrially derived sediment from Lake Calcasieu and surrounding wetlands. Results from geochemical fingerprinting of various potential sediment sources indicate the Calcasieu River and the Gulf of Mexico are primary contributors of sediment to the CSC, and sediments sourced from bankline erosion, Lake Calcasieu bed, and interior wetlands are secondary in nature. These results suggest that engineering solutions to control shoaling in the CSC should be focused on sources originating from the Gulf of Mexico and river headwaters as opposed to Lake Calcasieu, channel banklines, and surrounding wetlands
  • Impacts of Granular Activated Carbon (GAC) on Erosion Behavior of Muddy Sediment

    Abstract: Recent policy changes regarding the placement of dredged material have encouraged the USACE to increase its beneficial use (BU) of the sediments dredged from the nation’s navigation channels. A good portion of this material is fine grained (<63 mm), which traditionally has limited use in BU applications, in part due to its dispersive nature. A need exists to evaluate the potential of stabilizing and using fine-grained sediment (FGS) in BU projects. Previous studies have shown the addition of granular sand to FGS reduces the mobility of the bed. The potential of using Granular Activated Carbon (GAC), an amendment commonly used in environmental capping involving FGS, as a similar bed stabilizing material was explored in this study. A series of laboratory erosion tests using Sedflume were performed on FGS-GAC mixtures that ranged from 5% to 20% GAC by mass. Results suggested that GAC content ≤10% had no influence on the stability of the bed while GAC content ≥15% appeared to reduce both critical shear stress (τcr) and erosion rate (n). However, when compared to control cores, those without GAC, clear evidence of bed stabilization of FGS from the addition of GAC was not observed.
  • Automatic Identification System Analysis Package User Guide

    Abstract: The Automatic Identification System Analysis Package (AISAP) enables acquisition, statistical analysis, and visualization of Automatic Identification System (AIS) data from historic vessel position reports. The web-based AISAP software allows the users to choose which data they want to examine for a specific geographic area, time period, and vessel type(s). Built-in features provide vessel characteristics, arrival and departure information within a geofenced area, vessel travel time between two locations, vessel track line plots, and relative density plots of AIS data reports. AISAP accesses the Nationwide Automatic Identification System database hosted by the United States Coast Guard. This user manual provides training exercises for users to follow to familiarize themselves with AISAP procedures and workflows. These training exercises also provide examples of AISAP products.