9 Dec 2021

Evaluation of Geocell-Reinforced Backfill for Airfield Pavement Repair

Abstract: After an airfield has been attacked, temporary airfield pavement repairs should be accomplished quickly to restore flight operations. Often, the repairs are made with inadequate materials and insufficient manpower due to limited available resources. Legacy airfield damage repair (ADR) methods for repairing bomb damage consist of using bomb damage debris to fill the crater, followed by placement of crushed stone or rapid-setting flowable fill backfill with a foreign object debris (FOD) cover. While these backfill methods have provided successful results, they are heavily dependent on specific material and equipment resources that are not always readily available. Under emergency conditions, it is desirable to reduce the logistical burden while providing a suitable repair, especially in areas with weak subgrades. Geocells are cellular confinement systems of interconnected cells that can be used to reinforce geotechnical materials. The primary benefit of geocells is that lower quality backfill materials can be used instead of crushed stone to provide a temporary repair. This report summarizes a series of laboratory and field experiments performed to evaluate different geocell materials and geometries in combinations with a variety of soils to verify their effectiveness at supporting heavy aircraft loads. Results provide specific recommendations for using geocell technology for backfill reinforcement for emergency airfield repairs.

29 Apr 2020

PUBLICATION NOTICE: Laboratory Characterization of Rapid-Setting Flowable Fill

Abstract: Utility Fill One-Step 750® is a rapid-setting flowable fill product that has previously been validated in numerous full-scale demonstrations as an expedient backfill solution for Rapid Airfield Damage Recovery. Although the field performance of Utility Fill One-Step 750® has been extensively documented, a full laboratory characterization has not been conducted. This report analyzes and documents results from several laboratory tests conducted at two water to-product ratios. The tests conducted are based on the suite of tests that make up the triservice spall repair certification program used for rapid-setting concrete products. Tests include strength and set time-related properties, typical parameter control tests for concrete, and tests to determine the mineralogy and chemical makeup of the material. Long-term expansion and contraction properties were also tested. The data presented herein are intended to provide an overall assessment of Utility Fill One-Step 750® and to provide reasonable estimates of various design parameters. The results can be used as a basis for the future development of a formal laboratory certification protocol to down-select other rapid-setting flowable fill products for further evaluation.