1 Jul 2025

Bruce Goff and the Camp Parks Entrance Sign: Bruce Goff’s Life, Achievements, Design Philosophy, and Military Contributions at Camp Parks, California

The Camp Parks entrance sign in Camp Parks, California was recommended eligible by the Army for the National Register of Historic Places (NRHP) in 1998 under Criterion C and the California Office of Historic Preservation concurred with that decision in 1999. Designed by renowned architect Bruce Goff while stationed by the Navy at Camp Parks, the sign holds a significant value in the architectural industry, although the sign is no longer used for its initial purpose. All structures, especially historic ones, require regular planned maintenance and repair. The most notable cause of historic structure element failure or decay is not the fact that the historic structure is old, but rather, it is caused by incorrect or inappropriate repair or basic neglect of the historic building fabric. This document is a report detailing historic information regarding Camp Parks, the life and success of Goff, as well as the 3D scanning, and the subsequent relocation of the Camp Parks entrance sign. This report satisfies Section 110 of the National Historic Preservation Act (NHPA) of 1966 as amended and will aid in management of the sign by personnel at Fort Hunter Liggett and Camp Parks.

9 May 2025

Headstone Inventory and Scanning at Mare Island Naval Cemetery, California

Abstract: The National Cemetery Administration (NCA) tasked the US Army Engineer Research and Development Center, Construction Engineering Re-search Laboratory (ERDC-CERL), with inventorying and scanning the nonmilitary headstones at Mare Island Naval Cemetery. The cemetery is located in Vallejo, California, and is part of the Mare Island Naval Ship-yard historic district, which was listed concurrently on the National Register of Historic Places and as a national historic landmark in 1975. The research in this report will assist the US Department of Veterans Affairs (VA), NCA, with compliance with the National Historic Preservation Act of 1966 (NHPA). This report contains a list of headstones that need to be repaired or re-placed and a list of headstones that need to be corrected due to errors. Separate from this report, NCA will be provided with 3D models in .obj (for computer numerical control [CNC]) or .stl (for 3D printing) format. These formats are industry-standard CNC fabrication methods used to cut new stones. This technology will preserve the artistic elements of the stones that would be lost in an AutoCAD rendering process.