15 Aug 2023

Dynamic Material Properties of Grade 50 Steel: Effects of High Strain Rates on ASTM A992 and A572 Grade 50 Steels

Abstract: Uniaxial tensile tests were conducted on American Society for Testing Materials International (ASTM) A992 and A572 Grade 50 steels at increasing strain rates to determine the material strength properties of structural members subjected to dynamic loadings. The increase in dynamic yield strength and ultimate tensile strength was determined to update design criteria within UFC 3-340-02, which are currently limited to ASTM A36 and A514 steels. The proposed updates will provide the necessary information required to design blast-resistant structures utilizing modern-day structural steels. The dynamic material properties determined by high-rate tensile tests were compared to static values obtained from ASTM E8 standard tensile tests. The comparisons were used to calculate dynamic increase factors (DIFs) for each steel at strain rates from 2E-3 to 2E0 inch/inch/second. The experiments revealed that the A992 steel exhibited an increase in yield strength up to 45% and ultimate tensile strength up to 20% as strain rate increased over the range tested. The A572-50 steel exhibited a similar increase in yield strength up to 35% and ultimate tensile strength up to 20%. The DIF design curves developed during this research will allow engineers to more efficiently design structural steel components of hardened structures for the protection of our nation’s critical infrastructure.