10 Sep 2025

Detachment and Transport of Composition B Detonation Particles in Rills

Abstract: The partial detonation of munitions used in military exercises leaves behind energetic particles on the surface of soil. Energetic particles deposited by incomplete detonations can then dissolve and be transported by overland flow and potentially contaminate ground and surface waters. The objective of this study was to evaluate the mechanisms of transport of Composition B, a formulation that includes TNT and RDX during overland flow. The transport of Composition B was examined using a rill flume with three flow rates and four energetic particle sizes. After each erosion simulation, energetic particles remaining on the soil surface were measured along with energetics dissolved in runoff, in suspended sediment, and in infiltration. Smaller particle sizes led to greater transport in both solution and sediment. The properties of the energetic compounds also influenced transport. More TNT was transported in runoff than RDX, likely due to TNT’s higher solubility and dissolution rates, however, overall, dissolved energetics in runoff and infiltration accounted for very little of the total transport. Most transport of Composition B was the result of the physical movement of energetic particles and flakes by erosion forces. This study’s results allow for improved prediction of Composition B transport during overland flow.

30 Aug 2022

Determination of Residual Low-Order Detonation Particle Characteristics from Composition B Mortar Rounds

Empirical measurements of the spatial distribution, particle-size distribution, mass, morphology, and energetic composition of particles from low-order (LO) detonations are critical to accurately characterizing environ-mental impacts on military training ranges. This study demonstrated a method of generating and characterizing LO-detonation particles, previously applied to insensitive munitions, to 81 mm mortar rounds containing the conventional explosive formulation Composition B. The three sampled rounds had estimated detonation efficiencies ranging from 64% to 82% as measured by sampled residual energetic material. For all sampled rounds, energetic deposition rates were highest closer to the point of detonation; however, the mass per radial meter varied. The majority of particles (>60%), by mass, were <2 mm in size. However, the spatial distribution of the <2 mm particles from the point of detonation varied between the three sampled rounds. In addition to the particle-size-distribution results, several method performance observations were made, including command-detonation configurations, sampling quality control, particle-shape influence on laser-diffraction particle-size analysis (LD-PSA), and energetic purity trends. Overall, this study demonstrated the successful characterization of Composition B LO-detonation particles from command detonation through combined analysis by LD-PSA and sieving.