21 Apr 2026

Review of Computational Fluid Dynamics Capabilities to Analyze the Behavior of Amphibious Vessels During Surf-Zone Transit

Abstract: This US Army Engineer Research and Development Center (ERDC), Coastal and Hydraulics Laboratory (CHL) Engineering Technical Note (CHETN) provides an overview of the state of computational fluid dynamics (CFD) techniques for the analysis of amphibious vessels transiting or interacting with the surf zone. In this CHETN we present (1) a background of the problem set, (2) a general discussion of CFD techniques available for the simulation and analysis of waterborne vessel response in water, (3) a discussion of CFD analysis of amphibious vessels in the surf zone, and (4) a discussion of combined scaled and CFD analysis of amphibious vessels in the surf zone.

23 Mar 2026

OpenFOAM Verification and Validation: Quantifying Multiphase Flow Solvers for a U-Bend Simulation

Abstract: This report presents a validation and verification study of multiphase solvers in the open-source software, OpenFOAM, for an open-channel U-Bend simulation. The study’s primary objective quantified the performance and discrepancies between different Volume of Fluid (VoF) solvers to establish robust guidelines for US Army Corps of Engineers (USACE) water resource applications. The study compared the algebraic solver, interFoam, with the geometric solver, interIsoFoam, and interIsoFoam’s various interface reconstruction schemes. Key parameters such as the Courant number, numerical schemes, and the effect of a buoyancy-modified turbulence model were evaluated for their effect on computational cost and solution accuracy. The results demonstrated that interFoam is significantly more computationally efficient than interIsoFoam, particularly at lower Courant numbers. While velocity fields were qualitatively similar across all solvers, interIsoFoam consistently predicted a lower free-surface elevation. Including a buoyancy source term in the turbulence model improved interface sharpness and corrected the over-production of turbulent kinetic energy at a negligible computational cost. For the U-Bend case, choosing a specific geometric reconstruction scheme had minimal effect on the solution’s accuracy. Therefore, interFoam with a turbulence buoyancy term is recommended as a cost-effective and accurate approach.

5 Aug 2022

South Pole Station Snowdrift Model

Abstract: The elevated building at Scott-Amundsen South Pole Station was designed to mitigate the effects of windblown snow on it and the surrounding infrastructure. Because the elevation of the snow surface increases annually, the station is periodically lifted on its support columns to maintain its design height above the snow surface. To assist with planning these lifts, this effort developed a computational model to simulate snowdrift formation around the elevated building. The model uses computational fluid dynamics methods and synthetic wind record generation derived from statistical analysis of meteorological data. Simulations assessed the impact of several options for the lifting operation on drifts surrounding the elevated building. Simulation results indicate that raising the eastern-most building section (Pod A), or the entire station all at once, can reduce drift accumulation rates over the nearby arches structures. Long-term analyses, spanning 5–6 years, determine whether an equilibrium drift condition may be reached after a long period of undisturbed drift development. These simulations showed that after about 6 years, the rate of growth of the upwind drift slows, appearing to approach an equilibrium condition. However, the adjacent drifts were still increasing in depth at a roughly linear rate, indicating that equilibrium for those drifts was still several seasons away.

5 Aug 2022

SAGE-PEDD User Manual

Abstract: SAGE-PEDD is a computational model for estimating snowdrift shapes around buildings. The main inputs to the model are wind speed, wind direction, building geometry and initial ground or snow-surface topography. Though developed mainly for predicting snowdrift shapes, it has the flexibility to accept other soil types, though this manual addresses snow only. This manual provides detailed information for set up, running, and viewing the output of a SAGE-PEDD simulation.