Home / Media / News Stories
Results:
Category: Installations
Clear

  • March

    The team that ensured proper delivery, placement, and installation of the nanogrid at Fort Bliss, Texas. From left: SFC Aileen Keemer, 1st Armored Division at Fort Bliss; Patricia Cutler, wildlife biologist at U.S. Army Garrison White Sands; Carlos Molina, energy manager at Fort Bliss Directorate of Public Works; Benito Perez, research engineer at the Engineer Research Development Center’s Construction Engineering Research Laboratory

    ERDC Hydrogen Energy Node Installed at Fort Bliss Innovations Lab

    The 1st Armored Division (1 AD) Innovations Lab, located on Fort Bliss, Texas, is now at the forefront of Army energy modernization following the installation and operational validation of a cutting-edge hydrogen nanogrid, also known as an energy node, developed with industry collaboration at the U.S. Army Engineer Research Development Center (ERDC)’s Construction Engineering Research Laboratory (CERL).

  • February

    Representatives from ERDC’s Environmental Lab traveled to USAG Bavaria-Garmisch in Germany to conduct water assessments focusing on improving water quality and resilience.

    ERDC researchers conduct water assessment at USAG Bavaria-Garmisch in Germany

    Ensuring safe, reliable drinking water is critical to protecting Soldier health and maintaining mission readiness at U.S. military facilities worldwide. To support that objective, three researchers from the U.S. Army Engineer Research and Development Center’s (ERDC) Environmental Laboratory (EL) recently traveled to a U.S. military base in Germany to evaluate water quality, resilience and treatment needs.

  • December

    U.S. Army Soldiers from 1st Battalion, 1st Air Defense Artillery Regiment, 38th Air Defense Artillery Brigade emplace a Patriot radar system under night conditions, July 19, 2025. The Janus Program, the Army’s next-generation nuclear power program, aims to deliver secure, resilient, and reliable energy to support national defense installations and critical missions.

    ERDC explores Nuclear Energy Systems to power future mission

    A strong, resilient energy supply is critical for military installations, and researchers at the U.S. Army Engineer Research and Development Center (ERDC) are evaluating domestically produced nuclear energy systems to provide critical research in support of the Army’s Janus Program.

  • August

    Melanie Johnson, with ERDC’s Construction Engineering Research Laboratory (CERL), stands among some of her colleagues after being honored with the Federal Energy Management Program (FEMP) Career Exceptional Service Award.

    CERL’s Melanie Johnson wins Federal Energy Management Program (FEMP) Career Exceptional Service Award

    One of the U.S. Army Engineer Research and Development Center’s (ERDC) electrical engineers earned recognition for her contributions to improving microgrid technology. Melanie Johnson, a research electrical engineer and team lead at ERDC’s Construction Engineering Research Laboratory (CERL), earned the Federal Energy Management Program (FEMP) Career Exceptional Service Award.

  • March

    Hydrogen-powered fuel cell forklift at North Riverside Illinois Army National Guard

    ERDC leads demonstration of hydrogen fueled equipment at National Guard site in Illinois

    The U.S. Army Engineer Research and Development Center's (ERDC) Construction Engineering Research Laboratory (CERL) is advancing energy resiliency and reliability by using hydrogen as a sustainable, renewable energy source. ERDC-CERL is spearheading research and development efforts to integrate hydrogen energy solutions into military operations, aiming to provide clean backup energy systems that enhance the energy independence of Department of Defense (DoD) installations.

  • February

    1AD Commanding General Maj. Gen. Curtis Taylor ; Congresswoman Veronica Escobar and Fort Bliss Garrison Commander Col. Brenden Gallagher cut the ribbon for the largest 3D-printed barracks in the DoD.

    ERDC plays critical role in review of first 3D printed Army barracks

    The U.S. Army is taking a giant leap into the future of military construction with the debut of its first-ever additively constructed (3D-printed) Army barracks in Fort Bliss, Texas, and the U.S. Army Engineer Research and Development Center (ERDC) played an important role in making the demonstration successful.

  • December

    The Hon. Rachel Jacobson, assistant secretary of the Army, Installations, Energy and Environment, and Maj. Gen. David Doyle, commanding general, 4th Infantry Division and Fort Carson, cut the ceremonial ribbon celebrating a new energy-efficient, large flow battery system pilot program Nov. 20, 2024, on Fort Carson. The ceremony marks construction completion of a customer-sited, large redox flow battery which has been dubbed “GridStar Flow” by its Lockheed Martin designers. The ribbon-cutting included Patrick Appleman, center right, director of the U.S. Army Installation Management Command-Readiness; 4th Infantry Division and Fort Carson Command Sgt. Maj. Alex Kupratty, far right; Fort Carson Garrison Commander Col. Erik Oksenvaag, second from left; Garrison Command Sgt. Maj. Jason Mortensen, left; Dr. Andrew Nelson, middle left, director, Construction Engineering Research Laboratory, U.S. Army Engineer Research and Development Center, U.S. Army Corps of Engineers; and Steven Botwinik, vice president, Advanced Program Execution and Transition, Lockheed Martin Missiles and Fire Control.

    ERDC Celebrates Milestone with GridStar® Flow Battery Installation at Fort Carson

    The U.S. Army Engineer Research and Development Center's (ERDC) Operational Energy (OE) team is celebrating the construction and installation of the GridStar® Flow system, a redox flow battery solution designed for long-duration, large-capacity energy storage applications. The flow system is installed at Fort Carson, Colorado, and ERDC has led the technical evaluation and project management since 2022.

  • November

    Research scientists at ERDC have successfully demonstrated a novel method of 3-D printing with ice reinforced with natural fibers.

    ERDC scientists pioneer 3-D ice printing

    Research scientists at the U.S. Army Engineer Research and Development Center (ERDC) have successfully demonstrated a novel method of 3-D printing with ice reinforced with natural fibers.

  • October

    ERDC’s innovative window features a hardened compression frame that can be simply installed in a rough opening

    ERDC Partners with US Department of State to develop innovative window solutions

    Inventors from the U.S. Army Engineer Research and Development Center (ERDC) in Vicksburg, Mississippi, developed a groundbreaking innovation in window systems that are resistant to blasts, ballistics and forced entry threats.
  • An eastern small-footed bat (Myotis leibii) at USMA West Point, New York.

    International Bat Week: ERDC goes to bat to protect winged allies

    According to the Department of Defense (DOD) Natural Resources Program, more than 300 military installations will be potentially affected by at least one bat species listing under the Endangered Species Act in the next five years. Researchers from ERDC's Construction Engineering Research Laboratory (CERL) and Environmental Laboratory (EL) are at the forefront of innovative projects aimed at understanding and preserving bat populations on DoD installations.

  • May

    The U.S. Army Engineer Research and Development Center (ERDC) has four notable military construction (MILCON) projects that have been approved for construction in 2024. Jack Wheeldon, ERDC’s chief of Installation Support Division, and Michael Harding, ERDC master planner, review the plans with an estimated construction cost of $43 million.

    ERDC Unveils Strategic Vision and Cutting-Edge Projects for Infrastructure Enhancement and Sustainability

    The U.S. Army Engineer Research and Development Center (ERDC) is at the forefront of enhancing operations, infrastructure and installation maintenance, driven by a strategic vision that balances innovation with practicality. This vision is realized through meticulous planning, collaboration with stakeholders and a commitment to sustainability and energy efficiency.

  • March

    Dr. Sergey Vecherin, a research physicist with ERDC's Cold Regions Research and Engineer Laboratory, is the principal investigator of the Infection Risk Assessment on Military Installations (IRAMI) project, which aims to quantify the spread of infections and evaluate their impact on military personnel. Vecherin heads a team of ERDC researchers who have launched a new project that seeks to revolutionize the way military bases prepare for and combat respiratory infections, with implications that could reach far beyond military installations and into public spaces across the globe.

    ERDC research aims to model, combat respiratory infections

    A cross-laboratory team of U.S. Army Engineer Research and Development Center (ERDC) researchers has launched a new project that seeks to revolutionize the way military bases prepare for and combat respiratory infections, with implications that could reach far beyond military installations and into public spaces across the globe.

  • May

    Dr. Robert Moser, ERDC's Senior Scientific Technical Manager, discusses advanced materials and experimental testing capabilities with USACE District personnel.

    Engineering Solutions through Advanced Materials

    The U.S. Army Engineer Research and Development Center (ERDC) is conducting innovative research on advanced materials and manufacturing technologies that will play a vital role in both civilian and military applications.

  • January

    The new 4,008 square-foot annex building at the U.S. Army Corps of Engineers Field Research Facility in Duck, North Carolina.

    ERDC’s Field Research Facility to hold ribbon cutting ceremony for new annex

    The U.S. Army Engineer Research and Development Center (ERDC) will hold a ribbon cutting ceremony for the new annex building at its Field Research Facility in Duck, North Carolina, January 19 at 10 a.m. EST.

  • August

    Simple and effective bunker enclosure door designs for the U.S. Central Command to help reduce risk for traumatic brain injury to bunker occupants.

    ERDC, Transatlantic Division team recognized with USACE innovation award

    A team from the U.S. Army Engineer Research and Development Center’s (ERDC) Geotechnical and Structures Laboratory (GSL), the U.S. Army Corps of Engineers (USACE), Transatlantic Division and the USACE Protective Design Center was recently recognized with the 2022 USACE Innovation of the Year Award.

  • July

    Dr. Emily Asenath-Smith, far left, and fellow team members from the U.S. Army Engineer Research and Development Center’s Cold Regions Research and Engineer Laboratory (CRREL) in Hanover, New Hampshire, and Environmental Laboratory in Vicksburg, Mississippi, look at results from their water sustainment experiment. The team will be honored during a plaque presentation ceremony later this year for their work on multi-spectral photocatalytic compounds.

    ERDC researcher earns patent for high performance photocatalytic material

    Dr. Emily Asenath-Smith's determination to develop low energy solutions to remediate water led her to develop U.S. Patent No. 11,298,689, awarded April 12, 2022, for “Multi-spectral photocatalytic compounds.”

  • June

    Construction work at the U.S. Army Engineer Research and Development Center will soon be complete on the latest infrastructure enhancement project at the main campus in Vicksburg, Mississippi. The project includes road repair, easier access and cleaner layouts of roads, addition of new lighting, moving powerlines, repairing water and gas lines and rerouting and improving the communication lines.

    ERDC-Vicksburg infrastructure enhancements will soon be complete

    Construction will soon be complete on the latest infrastructure enhancements to the U.S. Army Engineer Research and Development Center’s (ERDC) main campus in Vicksburg, Mississippi.

  • May

    The machine shop is a one-stop-shop for ERDC researchers, scientists and engineers who need a unique part designed and fabricated by Donnelly and that cannot be bought off the shelf.

    Making it up with CRREL's machine shop

    Whether you’re a hobbyist at home or a researcher at the U.S. Army Engineer Research and Development Center’s (ERDC) Cold Regions Research and Engineering Laboratory (CRREL), not having one special piece to finish a project and that isn’t readily available is universal. The engineers, researchers, and scientists at CRREL need only ask Chris Donnelly, a CRREL engineering technician and machine shop manager, to make them the part they require.

  • November

    Water Recover Patent awarded to Construction Engineering Research Laboratory team

    Creating an energy-efficient invention to recover clean water for Soldiers in austere environments proved worthy of US Patent 11,029,044, “High Volume Air Stream Water Recovery System,” awarded in June to the research team at the U.S. Army Engineer Research and Development Center’s (ERDC) Construction and Engineering Research Laboratory (CERL) in Champaign, Illinois.
  • Engineers at the U.S. Army Engineer Research and Development Center (ERDC) are working to develop an Installation Energy and Water Plan to address resiliency for energy and water security at the ERDC Waterways Experiment Station in Vicksburg, Mississippi. (U.S. Army Corps of Engineers photo)

    ERDC working to address energy and water resiliency

    The U.S. Army Engineer Research and Development Center (ERDC) is working to develop an Installation Energy and Water Plan (IEWP) to address resiliency for water and energy security at the ERDC Waterways Experiment Station (WES) in Vicksburg, Mississippi.