17 Jun 2021

Application of Laser Induced Breakdown Spectroscopy (LIBS) for Environmental, Chemical, and Biological Sensing

Abstract: The Army is interested in sensors capable of characterizing/monitoring the environment (battlefield or military training ranges) at proximal distances. Recently, we evaluated laser induced breakdown spectroscopy (LIBS) systems (hand-held, proximal, and bench top) for the characterization of metals (antimony, copper, lead, tungsten, and zinc) in soils obtained from military training ranges. We then compared the results to findings obtained with standard field and laboratory instrumentation for metals analysis - X-ray Fluorescence (XRF) and Inductively Couple P28lasma- Optical Emission Spectroscopy (ICP-OES).

16 Jun 2021

Field Measurement and Monitoring of Hydrodynamic and Suspended Sediment within the Seven Mile Island Innovation Laboratory, New Jersey

Abstract: The Seven Mile Island Innovation Laboratory (SMIIL) was launched in 2019 to evaluate beneficial use of dredge material management practices in coastal New Jersey. As part of that effort, the Philadelphia District requested that the US Army Engineer Research and Development Center, Coastal and Hydraulics Laboratory, collect data to characterize the hydrodynamics and turbidity within the central portions of the SMIIL prior to and during dredge material placement. Pre-dredge monitoring found that apart from punctuated wind events, the study area waters were generally calm and clear with small waves, <0.25 m, slow current speeds (~0.1 m/s), low turbidity (~10 ntus), and low suspended sediment concentrations (~10–20 mg/L). In March 2020, 2,475 m3 of dredged sediment was placed on the northern portion of Sturgeon Island within the SMIIL. Turbidity in the waters surrounding the island was monitored to quantify extent of the sediment plume resulting from the placement. Observations found little to no turbidity plume associated with the dredging operations beyond 20 m from the island and that the plume was largely limited to areas near a tidal creek draining the placement area. Additionally, turbidity levels quickly returned to background conditions at times when the dredge was not in operation.

15 Jun 2021

Red River Structure Physical Model Study: Bulkhead Testing

Abstract: The US Army Corps of Engineers, St. Paul District, and its non-federal sponsors are designing and constructing a flood risk management project that will reduce the risk of flooding in the Fargo-Moorhead metropolitan area. There is a 30-mile long diversion channel around the west side of the city of Fargo, as well as a staging area that will be formed upstream of a 20-mile long dam (referred to as the Southern Embankment) that collectively includes an earthen embankment with three gated structures: the Diversion Inlet Structure, the Wild Rice River Structure, and the Red River Structure (RRS). A physical model has been constructed and analyzed to assess the hydraulic conditions near and at the RRS for verification of the structure’s flow capacity as well as optimization of design features for the structure. This report describes the modeling techniques and instrumentation used in the investigation and details the evaluation of the forces exerted on the proposed bulkheads during emergency operations for the RRS.

15 Jun 2021

Alternatives for Large Crater Repairs using Rapid Set Concrete Mix®

Abstract: Research was conducted at the U.S. Army Engineer Research and Development Center (ERDC) in Vicksburg, MS, to identify alternative repair methods and materials for large crater repairs using Rapid Set Concrete Mix®. This report presents the technical evaluation of the field performance of full-depth slab replacement methods conducted using Rapid Set Concrete Mix® over varying strength foundations. The performance of each large crater repair was determined by using a load cart representing one-half of the full gear of a C-17 aircraft. Results indicate that using rapid-setting concrete is a viable material for large crater repairs, and the performance is dependent on surface thickness and base strength.

15 Jun 2021

A Novel Laboratory Method for the Detection and Identification of Cyanobacteria Using Hyperspectral Imaging: Hyperspectral Imaging for Cyanobacteria Detection

Abstract: To assist US Army Corps of Engineers resource managers in monitoring for cyanobacteria bloom events, a laboratory method using hyperspectral imaging has been developed. This method enables the rapid detection of cyanobacteria in large volumes and has the potential to be transitioned to aerial platforms for field deployment. Prior to field data collection, validation of the technology in the laboratory using monocultures was needed. This report describes the development of the detection method using hyperspectral imaging and the stability/reliability of these signatures for identification purposes. Hyperspectral signatures of different cyanobacteria were compared to evaluate spectral deviations between genera to assess the feasibility of using this imaging method in the field. Algorithms were then developed to spectrally deconvolute mixtures of cyanobacteria to determine relative abundances of each species. Last, laboratory cultures of Microcystis aeruginosa and Anabaena sp. were subjected to varying macro (nitrate and phosphate) and micro-nutrient (iron and magnesium) stressors to establish the stability of signatures within each species. Based on the findings, hyperspectral imaging can be a valuable tool for the detection and monitoring of cyanobacteria. However, it should be used with caution and only during stages of active growth for accurate identification and limited interference owing to stress.

14 Jun 2021

AIS data case Study: identifying AIS coverage gaps on the Ohio River in CY2018

Abstract: This Coastal and Hydraulics Engineering Technical Note describes a method for evaluating the received coverage from Automatic Identification System shore sites and the availability of historic vessel position reports along the Ohio River. The network of AIS shoreside sites installed and operated by the US Army Corps of Engineers and the US Coast Guard receive information transmitted from vessels; however, reception of these transmissions is generally line-of-sight between the vessel and the AIS site antenna. Reception may also be affected by factors such as the quality of the transceiver installation aboard the vessel as well as the state of the equipment at the receiving site. Understanding how to define and quantify coverage gaps along the inland river system can inform research utilizing AIS data, provide information on the performance of the AIS network, and provide guidance for efforts to address identified coverage gaps.

11 Jun 2021

Topological data analysis: an overview

Abstract: A growing area of mathematics topological data analysis (TDA) uses fundamental concepts of topology to analyze complex, high-dimensional data. A topological network represents the data, and the TDA uses the network to analyze the shape of the data and identify features in the network that correspond to patterns in the data. These patterns extract knowledge from the data. TDA provides a framework to advance machine learning’s ability to understand and analyze large, complex data. This paper provides background information about TDA, TDA applications for large data sets, and details related to the investigation and implementation of existing tools and environments.

11 Jun 2021

The Forefront: A Review of ERDC Publications, Spring 2021

Abstract: The Engineer Research and Development Center (ERDC) is the premier civil works engineering and environmental sciences research and development arm of the U.S. Army Corps of Engineers (USACE). As such, it partners with the Army, Department of Defense (DoD), federal agencies, and civilian organizations to help solve our Nation’s most challenging problems in civil and military engineering, geospatial sciences, water resources, and environmental sciences. A special government knowledge center, ERDC Information Technology Laboratory’s Information Science and Knowledge Management (ISKM) Branch is critical to ERDC’s mission, fulfilling research requirements by offering a variety of editing and library services to advance the creation, dissemination, and curation of ERDC and USACE research knowledge. Serving as the publishing authority for the ERDC, ISKM publishes all ERDC technical publications to the Digital Repository Knowledge Core, sends a copy to the Defense Technical Information Center (DTIC) and creates a press release about each publication on the ERDC website. The Forefront seeks to provide an additional mechanism for highlighting some of our technical publications to the ERDC, USACE, Army, and DoD communities. This publication also encourages those outside ERDC to contact us about using ERDC editing services. For more information regarding the reports highlighted in this publications or others that ERDC researchers’ have created, please contact the ISKM virtual reference desk at erdclibrary@ask-a-librarian.info or visit the ISKM’s online repository, Knowledge Core, at https://erdc-library.erdc.dren.mil/

8 Jun 2021

New capabilities in CREATE™-AV Helios Version 11

Abstract: CREATE™-AV Helios is a high-fidelity coupled CFD/CSD infrastructure developed by the U.S. Dept. of Defense for aeromechanics predictions of rotorcraft. This paper discusses new capabilities added to Helios version 11.0. A new fast-running reduced order aerodynamics option called ROAM has been added to enable faster-turnaround analysis. ROAM is Cartesian-based, employing an actuator line model for the rotor and an immersed boundary model for the fuselage. No near-body grid generation is required and simulations are significantly faster through a combination of larger timesteps and reduced cost per step. ROAM calculations of the JVX tiltrotor configuration give a comparably accurate download prediction to traditional body-fitted calculations with Helios, at 50X less computational cost. The unsteady wake in ROAM is not as well resolved, but wake interactions may be a less critical issue for many design considerations. The second capability discussed is the addition of six-degree-of-freedom capability to model store separation. Helios calculations of a generic wing/store/pylon case with the new 6-DOF capability are found to match identically to calculations with CREATE™-AV Kestrel, a code which has been extensively validated for store separation calculations over the past decade.

8 Jun 2021

Summary of the SciTech 2020 Technical Panel on In Situ/In Transit Computational Environments for Visualization and Data Analysis

Link: http://dx.doi.org/10.21079/11681/40887This paper was originally presented at the American Institute of Aeronautics and Astronautics (AIAA) ScitTech 2020 Technical Panel and published online 4 January 2021. Funding by USACE ERDC under Army Direct funding.Report Number: ERDC/ITL MP-21-10Title: Summary of the SciTech 2020 Technical Panel on In