Publication Notices

Notifications of New Publications Released by ERDC

Contact Us

      

  

    866.362.3732

   601.634.2355

 

ERDC Library Catalog

Not finding what you are looking for? Search the ERDC Library Catalog

Results:
Archive: June, 2020
Clear
  • PUBLICATION NOTICE: Water Quality Visualization Tools: A Python Application (1/A)

    Abstract: On May 4, 2016, US District Court Judge Simon ordered the US Army Corps of Engineers and two other Action Agencies to produce a comprehensive Environmental Impacts Statement (EIS) by March 26, 2021. To do this, the Columbia River Systems Operation (CRSO) EIS will evaluate and compare a range of alternatives to offset or minimize any remaining unavoidable impacts. Due to the unique large system model approach, there is a need to quickly develop and analyze water quality model results. Therefore, there was a need for several visualization tools to assist the CRSO EIS team in promptly analyzing the results and creating publication-ready graphics. To create the most accessible desktop application for the CRSO EIS team, the Python programming language was used to quickly create three visualization tools. These three tools are only useful for relatively small data sets. If the team wishes to expand the functionality for larger data sets, it is recommended that model execution and analysis be moved to the supercomputers.
  • PUBLICATION NOTICE: Development and Application of the CASM-SL to Support Nutrient Management in Potential Sangamon River Levee Setbacks

    Abstract: Levee setbacks are defined by the intentional relocation of levees away from the river bank. This placement is often done to reduce flood risk, but it can also have environmental benefits. The Comprehensive Aquatic System Model (CASM) was used to look at the potential fate of nutrients and several environmental benefits for five potential management scenarios along the lower Sangamon River in Illinois. The model results showed that two scenarios were much more environmentally favorable relative to the outcomes considered here. One of the scenarios, where the existing gates were operated to allow the river access to the area behind the levee during extreme floods, was better at nitrogen and phosphorous accumulation. Removing the gates and creating a levee setback at this same site produced more aquatic plants, invertebrates, and fish but was not as effective at nutrient accumulation. This application of CASM demonstrates the potential of the model to provide objective rankings for the environmental benefits of levee setbacks.
  • PUBLICATION NOTICE: Theory, Formulation, and Implementation of The Cartesian and Spherical Coordinate Two-Dimensional Depth-Averaged Module of the Adaptive Hydraulics (AdH) Finite Element Numerical Code

    Abstract: The US Army Engineer Research and Development Center, Coastal and Hydraulics Laboratory, has undertaken the development of the multi-module Adaptive Hydraulics (AdH) hydrodynamic, sediment, water quality, and transport numerical code. This report documents the mathematical formulation and numerical implementation of the two-dimensional depth-averaged module of AdH.
  • PUBLICATION NOTICE: Sediment Sorting by Hopper Dredging and Pump-Out Operations: Conceptual Model and Literature Review

    Abstract: Dredged sediment placed on beaches or nearshore environments is customarily evaluated for compatibility with the native beach sediment to avoid unintended impacts to economic, environmental, or recreational resources. Consequently, some state regulatory authorities establish limits upon the fine-grained content for sediment designated for placement on certain beaches and nearshore environments. Hopper dredging operations for beach and nearshore placement typically include periods of overflow, which is recognized to produce some degree of separation between the size fractions of the dredged sediment. The degree of separation and the controlling factors of separation are presently poorly known and are the subject of this research. This report provides a conceptual model of the hopper dredging and placement processes, including the relevant processes associated with hopper dredge-associated sediment dynamics, generation and transport of the overflow sediment plume, and sediment winnowing at the beach outflow. Prior research is described, and knowledge gaps are identified. Finally, a research plan to validate prior research and to address knowledge gaps is presented. An annotated bibliography of relevant literature is given in an appendix. Documentation of the planned research presented herein will appear in future publications associated with this study.
  • PUBLICATION NOTICE: Nearshore Placement Workshop 2019: Sediment Nourishment of the Nearshore Environment

    Abstract: The Coastal Inlets Research Program and the Regional Sediment Management Program co-sponsored the 2019 Nearshore Placement Workshop. Thirty-four participants from the US Army Engineer Research and Development Center (ERDC) and numerous districts met in Vicksburg on January 29–30, 2019, as a part of the workshop. This workshop was convened to facilitate discussions on concerns districts face regarding nearshore placements from resource agencies and stakeholders, challenges to placing sediment in the nearshore, and future research needs. The workshop included ERDC presentations on the state of the science regarding nearshore placements; specific implementations of nearshore placements within various US Army Corps of Engineers districts; break-out-style discussions on nearshore placement challenges and potential paths forward; and group discussions on metrics for success, quantification of benefits, Statements of Need (SON), and research priorities. A few of the major recurring themes throughout the workshop were the importance of monitoring, concerns over the fate of fine-grained sediment, and difficulties conveying the benefits of nearshore placements to a wide range of audiences. The workshop culminated in a discussion of possible SON to be put forth to the ERDC research and development community. This special report describes the discussions and outcomes of the 2019 Nearshore Placement Workshop.
  • PUBLICATION NOTICE: Projecting Changes in Food Security Throughout Central America

    Abstract: Climate non-stationarity continues to change the productivity of local food and water supply. These changes in supplies could result in starvation or surpluses, greatly affecting the surrounding populations and causing adverse effects such as malnutrition, mass migration, and political unrest. This study addresses the following questions regarding the future potential of land resources to support local populations with food and water: How will crop production be affected by changing environmental conditions? Which specific regions are expected to experience the greatest pressure? How might we expect land use to shift through the end of the 21st century, based on future environmental conditions? Current crop growth is analyzed, along with projected crop growth based on future climate scenarios. Recent historic anthropogenic biome maps are statistically correlated with recent historic climate data to generate models and are applied to anticipated future climates to generate future anthrome maps. The crop analysis is then coupled with the anthromes results, yielding a crop suitability forecast. This analysis is constrained to the area of Central America over the course of the 21st century for this study.
  • PUBLICATION NOTICE: Full-Scale Testing of Commercially Available Cementitious Backfill and Surface Capping Materials for Crater Repairs

    Abstract: The Air Force Civil Engineer Center (AFCEC) Rapid Airfield Damage Recovery (RADR) program currently utilizes rapid-setting flowable fill (RSFF) and rapid-setting concrete (RSC) for backfilling and capping crater repairs. These materials have been proven successful through many full-scale tests, troop demonstrations, and live flight trafficking. However, only one proprietary product is currently approved for each material. Two candidate capping materials and one backfill material were evaluated by conducting simulated crater repairs and collecting appropriate data. For capping products, both small (8.5 ft x 8.5 ft) and large (15 ft x 15 ft) repairs were conducted and trafficked with simulated F-15E aircraft traffic. For the backfill material, three small repairs were backfilled and the California Bearing Ratio (CBR) was estimated at cure times of 0.5, 2, and 24 hr. Overall, repairs capped with Western Materials Fastrac 246 failed after only 2,000 passes, so the material is not currently recommended for approval. Repairs capped with Buzzi Unicem Ulti-Pave3® were able to sustain 3,500 passes before trafficking was ceased, so this material is recommended for approval as a crater repair capping material. CTS rapid-setting flowable fill backfill exhibited lower than expected CBR values and did not allow timely percolation of mix water, so it is not currently recommended for approval at this time.
  • PUBLICATION NOTICE: Investigation of Materials for Charleroi Lock and Dam Monongahela River Reconstruction Project

    Abstract: The investigation described in this report was conducted for the U.S. Army Engineer District, Pittsburgh as part of a preliminary investigation of cementitious materials and concrete design pursuant to construction of Charleroi Lock and Dam Monongahela River Reconstruction Project. Local materials provided to the U.S. Army Engineer Research Development Center (ERDC) for testing included three different coarse aggregate gradations, two fine aggregate sources, a type II (MH) cement, four fly ash sources, a slag cement, a silica fume, a limestone powder, five admixtures, and two water sources. Aggregate tests consisted of sieve analysis, specific gravity, absorption, materials finer than No. 200, organic impurities, soundness, LA abrasion, clay lumps and friable particles, flat and elongated particles, lightweight particles, and petrography. All cementitious, admixtures, and water-source materials were tested for chemical and physical properties based on appropriate specifications. In addition, four mixture proportions developed by the ERDC for this project in 2005 were scaled to determine the early stiffening of mortar, freezing and thawing, and heat of hydration. This report presents the material characteristic results determined by laboratory testing in accordance with American Society for Testing and Materials procedures or regulating specification criteria.
  • Cold Regions Research and Engineering Laboratory announces closure of child development center

    The Cold Regions Research and Engineering Laboratory (CRREL) announced June 5 that the child development center currently located at the laboratory in Hanover, New Hampshire, is scheduled to permanently close Sept. 15.
  • PUBLICATION NOTICE: An Assessment of an Inexpensive COTS 360-degree Camera for Mapping and Localization in a GPS-denied Area

    Purpose: The efficacy of using a low Size, Weight, Power, and Cost (SWAP-C) Commercial off the Shelf (COTS) 360-degree camera was evaluated for localization and positioning in a GPS-denied environment. Specifically, OpenVSLAM was utilized to generate point clouds with negligible drift using a RICOH THETA S 360-degree field of view camera without the aid of an Inertial Measurement Unit (IMU). OpenVSLAM is also demonstrated to show that it can localize and position with a pre-generated map.